AirSense10 AutoSet CPAP Machine with Heated hose and P10 mask. Prescription is required for US buyers.
International buyers may need to pay import taxes or customs fees.
This machine is brand new and comes with a 2-year warranty.
The machine is shipped with:
If you need this machine with a different mask, please follow this link to our Starter Kits.
The AirSense10 AutoSet CPAP Machine is a popular lightweight model that automatically adjusts pressure levels, provides heated humidification for added comfort, and allows for immediate setup and use without complicated assembly requirements. This is ResMed’s first Smart CPAP machine and is a high-selling device due to its streamlined design and easily accessible features. The built-in cellular modem allows for easy and remote access for viewing sleep reports and making adjustments, either directly or in the cloud.
Advanced Sleep Onset Detection
Advanced Sleep Onset Detection uses sensors to identify advanced sleep patterns immediately, allowing for flawless response times to provide treatment at the exact interval of advanced sleep onset.
Whisper Quiet Motor
ResMed’s Easy-Breathemotor helps to provide treatment without disruptions throughout the night, also making it easier for your sleep partner or others nearby in a travel-sleep environment.
Expiratory Relief Pressure
Expiratory pressure relief (EPR) refers to the machine’s maintenance system of immediate pressure reductions during each exhalation, an optimal method for increased comfort as adjustments are made without interruption to the patient.
AutoSetautomated responses give device users the comfort settings required for a peaceful user experience. Built-in ambient light sensors adjust brightness levels according to the ambient light surrounding the device at any time, and when not in use, the device will turn itself off until the next session.
AirFit P10 Nasal Pillow CPAP Mask with Headgear
The ResMed AirFit P10 Nasal Pillow CPAP Mask with Headgear is a lightweight mask that emits very little sound and provides a dual-pillow design for comfort in any position you choose. ResMed’s QuietAir woven-mesh vents soften and disperse exhalation and reduce the sound of breathing to a minimum, contributing to a gentle, easy to use and portable mask that retains its full effectiveness with a modest-sized frame.
As with all other ResMed masks, the pillow sizes are variable.
QuietAir Woven Mesh Vents
The QuietAir woven-mesh vent system diffuses breath during exhalation by releasing airflow out the sides of the mask and away from the user. In addition, the short, flexible tube is fastened to the mask to remain stable during sleep movements.
The AirFit P10 consists of three main parts: the frame, the headgear, and the dual-wall nasal pillows. Altogether the mask weighs roughly 1.6 ounces, making it one of the lightest masks available for CPAP therapy.
The QuickFit Elastic Headgear is designed for a tight but comfortable fit without the need for Velcro tabs or extra clips. The straps adjust for size and the dual nasal pillows will cushion the fit during movements.
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight Standard Water Chamber: 0.54 lb
Weight (with Side Cover, But without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in H Weight - Travel Bag: 1.18 lb
Complete Weight of Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; and Travel Bag: Approximately 5.25 lbs altogether
Water Chamber Capacity: 380 mL (12.8 oz) Weight - Power Supply, Cord and Plug: 1.29 lb
Dimensions - Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II DC Output - 90 W Power Supply: 24V --- 3.75A
Average Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O
Length - ClimateLineAir Tubing: 6 feet ClimateLineAir Tubing Material: Flexible Plastic
Material - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal Material - Filter: Polyester non-woven fiber
OperatingTemperature -41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature Heating Plate: 154° F (68° C)
Maximum Temperature Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Warranty: 2 Years
P10 nasal pillow mask:
Pillow: Compression Moulded Silicone Rubber
Headgear: 20% Elastane, 80% Polyamide Frame body: Polypropylene
Tube: Thermoplastic Polyester Elastomer (TPE) Stabilizers: Thermoplastic Polyester Elastomer (TPE) Swivel: Polycarbonate
Swivel Adaptor: Polypropylene
Total Weight: 1.6 oz.
ClimateLineAir heated tube:
Material Components: Flexible Plastic and Electrical Components
Hose Length: 6' 4"
Inner Diameter: 19 mm
Hose Weight: 5.3 oz
Temperature Range: 60° F - 86° F (16° - 30°C)
Storage Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Operating Humidity: 10 - 95% Relative Humidity, Non-Condensing
Maximum Recommended Pressure: 25 cm H2O
We ship orders domestically and internationally. You can choose which carrier to use and which shipping speed. If you do not see an option you want, or if you want your order to be delivered by a specific date, please contact us.
Before Placing Your Order
Please understand that our products are shipped from the United States. Buyers are responsible for any import or customs dues, taxes, or fees. As a retailer, we do not know, nor can we predict, what these costs will be. In addition, someone MUST BE present to sign for SistemmaCPAP.com products upon delivery. In general, carrier estimated arrival dates on international orders are not accurate and should not be relied upon.
Buyer be Aware
It is a buyer's responsibility to familiarize himself/herself with our return and shipping policies or to contact us before making a purchase. We are not responsible for any buyer's mistake or incorrect assumption about a product sold on the website.
International orders shipped by DHL will arrive in one to five business days if the customs office in your country is not busy. It will take longer during holiday seasons.
We do not ship to Spain because they do not allow this equipment there. If you placed the order from Russia or China, it can only be shipped by DHL if you are an officially registered business. Nor Russia nor China does not allow DHL delivery to individuals. If you are not a business, your order will be shipped by USPS Priority or Express mail.
If you are a buyer from Mexico, we will ship your order by USPS Priority or Express mail (no DHL shipments).
If you are ordering from China, understand that China does not allow return shipments if the buyer’s address is incorrect. Buyers in China are encouraged to purchase insurance to secure items in the case that errors may occur, as the buyer will otherwise be liable for any loss due to incorrect, unreadable, or inconsistent shipping addresses.
International Fees and Duties
If you are an international buyer, expect to pay some amount of fees and duties. From our experience as a retailer, we have seen these charges as low as $83 Canadian, in the case of Canada, and as high as $120 USD for buyers from Asia and some European countries. These charges can vary a great deal between nations and territories.
We are not customs experts, so we do not know, nor can predict, what customs taxes or dues will be added to a shipment. It is the responsibility of the buyer to cover these charges. If a buyer changes his or her mind and decides to return an order due to customs fees, we will issue a full refund except for the shipping charges incurred.
The buyer can get a rough idea of the customs fees on the web site https://www.simplyduty.com. Please use HS code 9019.20.0000.
Within the U.S., “Two-Day Delivery” means two business days (excluding weekends and holidays). All express orders placed before 3 PM Mountain Time will be shipped the very same day, and if after 3 PM, it will be shipped the following day. For example, if a Two-Day Delivery order has been placed on Friday after 3 PM Mountain time, it will be shipped on Saturday and delivered on Tuesday or Wednesday.
Due to increasing numbers of fraudulent claims of items not being received, we require a signature for all orders over $200. If you are not home at the time of delivery, the carrier will either try to re-deliver the next day, or they will leave you a note with the address where your mail can be picked up.
A machine comes with a two-year warranty. This warranty covers the machine and power supply only. Accessories, such as water chambers or hoses, are covered by a six-month warranty. If you need your unit to be serviced, please contact us, not the manufacturer. Your machine would need to be shipped back to us for service, repairs or replacement. If necessary, we can issue a repair through the manufacturer on your behalf.
A new CPAP machine or oxygen concentrator comes with a two-year in-house warranty, a used or refurbished unit - with 90-day. This warranty covers the machine and power supply only. Accessories such as water chambers or hoses are covered by a six-month warranty if they are sold with a new unit and 90-day warranty if sold with an used or refurbished unit. Masks, hoses and accessories are guaranteed against manufacturer defects for 6 months.
If you need your unit to be serviced, please contact us, not the manufacturer. Your machine would need to be shipped back to us for service, repairs or replacement. If necessary, we can issue a repair through the manufacturer on your behalf.
Please note - masks cannot be returned based on the claim that they leak air or do not fit. Water chambers need to be changed every 6 months. If your water chamber has been used for 6 months or longer and starts to leak it is time to purchase a new chamber.
Buyer be Aware
It is a buyer's responsibility to familiarize himself/herself with our return and shipping policies or to contact us before making the purchase. We are not responsible for any buyer's mistake or incorrect assumption about a product sold on the website.
Our return policy is designed for the buyers who are buying our equipment with the intent to keep it. Please call us, email us, or use the contact page if you have any doubt or question about an order before shipment. We are here to help.
New to PAP?
If you are unfamiliar with CPAP machines and want to try a machine or a mask for the first time, you will be better off renting first, either from us or from a convenient local supplier. This allows you to familiarize yourself with the treatment before making a decision on a purchase. We cannot guarantee that a mask, a machine, a specific feature, or the therapy itself will work for you. Nor can we be held liable for any manufacturer's advertisement claims. Do your research. These products are a lifestyle change, and you should educate yourself about any choice of purchase.
Within 30 days of the date of purchase, a customer may return a CPAP machine if it is in new condition and still receive a 100% refund minus shipping costs. This will include a return shipping cost that the customer will need to pay. If a customer returns a CPAP machine in used condition, we will refund 70% of the purchase price minus shipping costs. In either case, the customer pays for all return shipping charges. Masks are not returnable if used, damaged, or if the package has been opened. Machines are not returnable if damaged by the user in any way or if there is a strong odor, such as from smoking.
If 30 days have passed, nothing is returnable. However, if we make an exception and accept the return, the customer will receive 30% to 50% of the value of the machine, depending on its condition. If something is missing in the returned package, these items will be subtracted from the return total.
If you want a memory card you must request it before your order is shipped.
Product Images and Descriptions
The product images shown are for illustration purposes only and may not be an exact representation of the product. In addition, descriptions are based on manufacturer specifications and advertised features. We in no way can guarantee that any description is accurate.
Defects and Non-Functioning Products
SistemmaCPAP.com will accept returns on merchandise sold that has manufacturing defects. If the product you purchased has defective materials and/or workmanship, please contact us and we will let you know if SistemmaCPAP.com can deal with the manufacturer on your behalf to have the item repaired or replaced. Please note that any associated shipping cost to return your purchased merchandise to SistemmaCPAP.com must first be paid by the buyer. No credits, refunds, or replacement products will be sent until we have received the item(s) for examination.
While ResMed machines are extremely reliable and rarely have defects, if there is by chance a defected machine, SistemmaCPAP.com will exchange the machine if a defect is verified upon return. A replacement unit will be sent immediately to the customer. If we cannot verify said defect, the unit will be shipped to the manufacturer for evaluation. This could take up to three weeks before the item is returned at the evaluation’s conclusion.
Machines with functional issues that are no longer under warranty may still qualify for repair by the manufacturer. This policy varies by manufacturer. A Diagnostic Fee, may or may not be applied to the actual repair cost and will be collected prior to submitting the machine to the manufacturer for assessment.
Mask sizes vary, and different manufacturers use different sizing standards and guides. If you wear one size mask in a particular model, do not assume you wear the same size in another model. Check with us first to be sure before you make your order. We are always available to our customers.
Please note that all masks leak air at some point, and to some extent. When this occurs, it takes time and a specific skill set to adjust the mask so that it fits the customer's face and the air leakage is minimal. Because of this, return requests based on a claim that mask leaks air will not be approved, but we are willing to help you with your sizing specifications. Please contact us via phone, email, or through our contact page for details.
Distilled water should ALWAYS be used on the water chambers. Tap or bottled water may cause a layer of salt to settle at the bottom of the chamber and can force a machine heating element to overheat trying to maintain proper humidity. This will significantly shorten the expected longevity both the water chamber and the heating element of the machine. Use of tap or bottled water also waives any warranty of chamber and/or heating element, as it is in direct violation of the product use agreement and instructions.
Loaner machines are offered for a flat rental fee to customers whose machine purchased from SistemmaCPAP.com is in need of repair or replacement.
We will do our best to meet your requests for the type of loaner you would like, however, loaner brands and models have varying availabilities.
You must return your loaner machine within 7 days of your repaired or replacement machine being shipped to you. If a loaner machine is not returned to us within 14 days of your return product’s arrival, you will be charged for the cost of the loaner machine.
We reserve the right to repackage machines and other products in generic shipping boxes for more convenient transport, and to verify parts and functioning. This also ensures that the product you purchase has been inspected prior to shipment.
The AirSense 10, AirMini and DreamStation machines meet Federal Aviation Administration (FAA) requirements for devices taken on board, so there will be no problem using the them if needed for sleep during flights.
International Power Source Compatibility
Both the AirSense 10, AirMini and DreamStation machines are compatible with all international power sources. The adapter is equipped for any residential or commercial power outlet.
Water for humidifier
Only distilled water should be used in CPAP machine humidifiers. Using tap or bottle water will shorten the life of thw water chamber and will void warranty for repair of circuitry that heats up the humidifier.
The P10 Mask should be gently hand washed in warm water and mild soap. Note that the mask vent may show discoloration over time.
WARNING: Always follow cleaning instructions and use mild soap. Some cleaning products may damage the mask, its parts or its functions. Additionally, harmful residuals can potentially be inhaled if not rinsed thoroughly.
CAUTION: If any component shows visible signs of deterioration such as cracking, wear, or tears, the component should be replaced before continuing treatment. Also avoid connecting flexible PVC products to any part of the mask. Flexible PVC contains elements that can damage the materials of the mask.
Do I need a prescription to buy?
Customers from USA and Canada who purchase CPAP machines and masks for their own use need a valid prescription sent to us before we ship their orders.
© Sistemma 2020. All Rights Reserved.
Follow Us :
Created by Primeview, one of the leading phoenix web design firms
Optimized by Optimizex, Phoenix, Arizona SEO Company