Photo by Bruno van der Kraan via Unsplash Want to Boost Your Treatment Compliance? Watch Yourself Sleep Without Your […]
Photo by Bruno van der Kraan via Unsplash Want to Boost Your Treatment Compliance? Watch Yourself Sleep Without Your […]
AirSense 10 AutoSet For Her model 37209 (regular hose) or 37210 (heated hose) with F20 or F30 Full Face mask
Attention: if you need a Starter Kit with other mask please click below:
The AirSense 10 AutoSet For Her is a breakthrough model that uses algorithms established specifically for female patients. Airsense 10 For Her algorithm responds to apnea-hypopnea index levels between 5 and 30, tailored design for optimal comfort in the mild-to-medium range. But for more severe sleep apnea conditions (i.e. those with an AHI greater than 30), the AirSense10 AutoSet For Her can be set to the standard AutoSet algorithm found in the original AirSense 10 AutoSet device.
Advanced Sleep Onset Detection
Advanced Sleep Onset Detection uses sensors to identify advanced sleep patterns immediately, allowing for flawless response times to provide treatment at the exact interval of advanced sleep onset.
Whisper Quiet Motor
ResMed’s Easy-Breathe motor helps to provide treatment without disruptions throughout the night, also making it easier for your sleep partner or others nearby in a travel-sleep environment.
AirView Remote Access
The AirView remote access system gives you complete access from anywhere, whether through a cellular device or with a computer in the cloud. With AirView, treatment data reports, device settings, or product specifications are always on hand for easy reference and adjustments.
Expiratory Relief Pressure
Expiratory pressure relief (EPR) refers to the machine’s maintenance system of immediate pressure reductions during each exhalation, an optimal method for increased comfort as adjustments are made without interruption to the patient.
AutoSet Automated Responses
AutoSet automated responses give device users the comfort settings required for peaceful user experience. Built-in ambient light sensors adjust brightness levels according to the ambient light surrounding the device at any time, and when not in use, the device will turn itself off until the next session.
AirSense 10 products and capabilities are consistent with the Federal Aviation Administration (FAA) requirements for air travel, giving device users a comfortable flight option for standard commercial flights in and out of the U. S.
International Power Source Compatibility
The AirSense 10 is compatible with all international power sources. The adapter is equipped for any residential or commercial power outlet.
ClimateLineAir Heated Tube
The ClimateLineAir Heated Tube for AirSense 10 and AirCurve 10 is a new addition to the ResMed heated tubing lines and offers optimum compatibility by monitoring temperatures from mask to user and making adjustments to ambient conditions. The new standard in mobility is met with a ClimateLineAir swivel connecting the tube to the mask, and heat levels are adjusted to reduce rainout and maintain humidity.
A heated hose provides ideal conditions for CPAP and other ventilation therapies by accurately adjusting humidity and temperature levels. When attaching the ClimateLineAirHeated Tube to a CPAP machine, Auto Climate Control will begin, allowing the heat setting of the humidifier and tube to adjust to its environment and provide genuinely customized breathing therapy.
F30 mask (comes only in small or medium (also called standard) sizes).
New ResMed AirFit F30 Full Face Hybrid Mask
The ResMed AirFit F30 is a Full Face Mask that covers the nose and mouth but leaves space for normal breathing. Held tight with cushioned seams, the AirFit F30 uses compact cushions to reduce any chance for skin irritation and increase overall comfort. It's an ideal mask for those wanting the security of a full-face model with an open field of vision. Lighter, smaller, and quieter than traditional full-face masks, the F30 gives patients a new experience with the secure fit of a conventional CPAP mask.
Open Field of Vision
The ResMed AirFit F30 Full-Face Mask reduces contact by using a strap at the top of the head, thereby avoiding any obstructive sealing over the eyes. And with only four contact points, there are fewer chances for irritation or red marks on and around the face.
The ultra-compact cushion design opens the field of vision even more than previous models and reduces obstructions with limited contact. You can read, work on your laptop, or watch TV.
With a lighter, smaller, and quieter model than traditional full-face masks, the AirFit F30 is a new, innovative approach to a classic design standard. For those wanting full-face security with a lighter touch, this mask offers an ideally snug fit without the irritation caused by some full-face models in the past.
Open Field of Vision
The open field of vision makes it possible to just about anything while still remaining in your therapy environment. This can also increase mental comfort as there are less obstructions and attachments to cause concern.
ResMed’s QuietAir Elbow truly minimizes noise from CPAP masks, and the AirFit F30 is no exception. The elbow itself works as a noise diffuser, dispersing exhaled air over a wider area and filtering the sound at the same time.
Weight - Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H Weight - Chamber: .54 lb
Weight - Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in Weight - Travel Bag: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Adapter Cord; ClimateLineAir Tubing; Mask; Travel Bag: Approximately 6.25 lbs
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Adapter Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II DC Output Range - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O
Length - Flow Generator Tubing: 6 feet
Materials - Flow Generator Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel
Materials - Standard Filter: Polyester fiber
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Warranty: 2 Years
F20 Full Face Mask
Cushions: Silicone Elastomer and Polycarbonate
Swivel Elbow: Polyamide, Silicone Elastomer, Polycarbonate, and Polybutylene Terephthalate
Frame: Polyester Elastomer, Polycarbonate, Nylon/Elastane, and Metal Plated Magnet Headgear: Nylon/Elastane, Polyurethane, and Polyamide
Headgear Clip: Polycarbonate and Metal Plated Magnet
Mask with Headgear Weight: 4.19 oz
A new CPAP machine or oxygen concentrator comes with a two-year in-house warranty, a used or refurbished unit - with 90-day. This warranty covers the machine and power supply only. Accessories such as water chambers or hoses are covered by a six-month warranty if they are sold with a new unit and 90-day warranty if sold with an used or refurbished unit. Masks, hoses and accessories are guaranteed against manufacturer defects for 6 months.
If you need your unit to be serviced, please contact us, not the manufacturer. Your machine would need to be shipped back to us for service, repairs or replacement. If necessary, we can issue a repair through the manufacturer on your behalf.
Please note - masks cannot be returned based on the claim that they leak air or do not fit. Water chambers need to be changed every 6 months. If your water chamber has been used for 6 months or longer and starts to leak it is time to purchase a new chamber.
Buyer be Aware
It is a buyer's responsibility to familiarize himself/herself with our return and shipping policies or to contact us before making the purchase. We are not responsible for any buyer's mistake or incorrect assumption about a product sold on the website.
Our return policy is designed for the buyers who are buying our equipment with the intent to keep it. Please call us, email us, or use the contact page if you have any doubt or question about an order before shipment. We are here to help.
New to PAP?
If you are unfamiliar with CPAP machines and want to try a machine or a mask for the first time, you will be better off renting first, either from us or from a convenient local supplier. This allows you to familiarize yourself with the treatment before making a decision on a purchase. We cannot guarantee that a mask, a machine, a specific feature, or the therapy itself will work for you. Nor can we be held liable for any manufacturer's advertisement claims. Do your research. These products are a lifestyle change, and you should educate yourself about any choice of purchase.
Within 30 days of the date of purchase, a customer may return a CPAP machine if it is in new condition and still receive a 100% refund minus shipping costs. This will include a return shipping cost that the customer will need to pay. If a customer returns a CPAP machine in used condition, we will refund 70% of the purchase price minus shipping costs. In either case, the customer pays for all return shipping charges. Masks are not returnable if used, damaged, or if the package has been opened. Machines are not returnable if damaged by the user in any way or if there is a strong odor, such as from smoking.
If 30 days have passed, nothing is returnable. However, if we make an exception and accept the return, the customer will receive 30% to 50% of the value of the machine, depending on its condition. If something is missing in the returned package, these items will be subtracted from the return total.
If you want a memory card you must request it before your order is shipped.
Product Images and Descriptions
The product images shown are for illustration purposes only and may not be an exact representation of the product. In addition, descriptions are based on manufacturer specifications and advertised features. We in no way can guarantee that any description is accurate.
Defects and Non-Functioning Products
SistemmaCPAP.com will accept returns on merchandise sold that has manufacturing defects. If the product you purchased has defective materials and/or workmanship, please contact us and we will let you know if SistemmaCPAP.com can deal with the manufacturer on your behalf to have the item repaired or replaced. Please note that any associated shipping cost to return your purchased merchandise to SistemmaCPAP.com must first be paid by the buyer. No credits, refunds, or replacement products will be sent until we have received the item(s) for examination.
While ResMed machines are extremely reliable and rarely have defects, if there is by chance a defected machine, SistemmaCPAP.com will exchange the machine if a defect is verified upon return. A replacement unit will be sent immediately to the customer. If we cannot verify said defect, the unit will be shipped to the manufacturer for evaluation. This could take up to three weeks before the item is returned at the evaluation’s conclusion.
Machines with functional issues that are no longer under warranty may still qualify for repair by the manufacturer. This policy varies by manufacturer. A Diagnostic Fee, may or may not be applied to the actual repair cost and will be collected prior to submitting the machine to the manufacturer for assessment.
Mask sizes vary, and different manufacturers use different sizing standards and guides. If you wear one size mask in a particular model, do not assume you wear the same size in another model. Check with us first to be sure before you make your order. We are always available to our customers.
Please note that all masks leak air at some point, and to some extent. When this occurs, it takes time and a specific skill set to adjust the mask so that it fits the customer's face and the air leakage is minimal. Because of this, return requests based on a claim that mask leaks air will not be approved, but we are willing to help you with your sizing specifications. Please contact us via phone, email, or through our contact page for details.
Distilled water should ALWAYS be used on the water chambers. Tap or bottled water may cause a layer of salt to settle at the bottom of the chamber and can force a machine heating element to overheat trying to maintain proper humidity. This will significantly shorten the expected longevity both the water chamber and the heating element of the machine. Use of tap or bottled water also waives any warranty of chamber and/or heating element, as it is in direct violation of the product use agreement and instructions.
Loaner machines are offered for a flat rental fee to customers whose machine purchased from SistemmaCPAP.com is in need of repair or replacement.
We will do our best to meet your requests for the type of loaner you would like, however, loaner brands and models have varying availabilities.
You must return your loaner machine within 7 days of your repaired or replacement machine being shipped to you. If a loaner machine is not returned to us within 14 days of your return product’s arrival, you will be charged for the cost of the loaner machine.
We reserve the right to repackage machines and other products in generic shipping boxes for more convenient transport, and to verify parts and functioning. This also ensures that the product you purchase has been inspected prior to shipment.
Do I need a prescription to buy?
Customers from USA and Canada who purchase CPAP machines and masks for their own use need a valid prescription sent to us before we ship their orders.
© Sistemma 2019. All Rights Reserved.
Follow Us :
Created by Primeview, one of the leading phoenix web design firms
Optimized by Optimizex, Phoenix, Arizona SEO Company